XA-series is enclosed in a casing of the 2U height. The amplifier is designed to be installed into a standard 19" rack.
The output stage is designed with the use of TOSHIBA bipolar transistors. The output stage of the XA-series is designed according to the Class H schematics with two-level power supply. All the protection systems are independent. One channel failure does not impact the operability of the other. Cooling is independent for each channel. Fan direction is from front to back. The unit is provided with smooth automatic cooling control system which changes its intensity depending on the temperature of the output stage. To protect the amplifier from ingress of dust and foreign objects, amplifiers have a dust filter made of polyurethane foam. The filter is located under the easily removable front panel.
Both channels share the same power supply toroid transformer-based source. This makes the XA-series the ideal amplifier for fixed installations where a high amplifing quality is needed.
|Applications||Live, DJ, Club, Bar/Cafe|
|RMS 4 Ohm||2 x 1200 W|
|RMS 8 Ohm||2 x 700W|
|Bridge 8 Ohm||2000 w|
|AC power||230AC, 50/60Hz|
|Frequency response||20-20kHz (+-0.2dB, Pnom.)|
|Total Harmonic Dist||0.003 (1kHz)|
|Damping Factor||400 ( 8 Ohm, 1kHz)|
|Cooling||Fan front to back, incl. dustfilter|
|Dimensions||482 mm (W) x 96 (H) x 414 mm (D)|
|XA-2400 spec sheet (PDF)|